Alarm For Full Disk / Write Error; Ptz Control Via The Rs-485 Interface; Managing Passwords And Users - Monacor IOR-204 Instruction Manual

6.6.7 Alarm for full disk / write error

The actions to be taken in case of a full disk or write error can
be viewed and changed in the menu "Exception": Call up the
tile menu and then, in the tile "Alarm", click the menu item
"Exception".
Exception
Event Type Switch Buzzer
No Space on Disk 10 s
Disk Error 10 s
Video Loss 10 s
Fig. 6-22 Alarm menu for the events specified
Menu item Function
Switch To enable / disable the alarm function
Buzzer Duration of the alarm sound
To route the alarm to the normally open relay
contact ALARM (12) or ALARM OUT (17), click the
Alarm Out symbol
click the activation field
be loaded with ⎓ 30 V, 1 A.
Latch Time Switching time for the relay contact
Full disk:
Show Message
the menu line „Video Loss" is without any function.
In case of an alarm, an e-mail will be sent; to make
Send Email the e-mail settings, call up the tile "Network" and
then click the menu item "Email"
Default
To reset this menu to its factory settings
Apply To save the settings

6.6.8 PTZ control via the RS-485 interface

– NWR-1608POE, NWR-3216POE and NWR-6400 only –
Make the required settings for remote PTZ control of cameras
that can only be operated via the RS-485 interface (17): Call
up the tile menu and then, in the tile "Channel", click the
menu item "PTZ".
PTZ
Channel Signal Type Protocol
CH1 Digital Pelco-D
CH2 Digital Pelco-D
CH3 Digital Pelco-P
CH4 Digital Pelco-P
Fig. 6-23 Menu for setting the remote control of cameras
Menu item Function
Channel Number of the camera channel
Signal Type
Specification of the signal type of the camera
Protocol Selection of the control protocol of the camera
42
Alarm Out Latch Time Show Message
10 s
10 s
10 s
Default
and then, in the window "
. The relay contact can
, write error: ,
Baudrate DataBit StopBit Parity
9600 8 1 None
9600 8 1 None
9600 8 1 None
9600 8 1 None
Copy Default
Menu item
Baudrate
DataBit
StopBit
Parity
Address
Send Email
Copy
Default
Apply
The settings for protocol, baud rate, bit etc. can be found in
the specifications of the camera.

6.6.9 Managing passwords and users

Only the administrator is allowed to make all settings for the
Apply
recorder and to use all functions. To change the name or the
password of the administrator and to grant specific rights to
the other users of the recorder, call up the menu "Multi-User".
1) Call up the tile menu and then, in the tile "System", click
the menu item "Multi-User".
Multi-User
Local->...",
No.
1
2
3
4
5
6
7
Default User
Fig. 6-24 Menu for managing passwords and users
2) To change names and passwords, click the symbol
the corresponding line.
Level
User Name
Address
Password Enable
1
2
Password Strength
3
Password
4
Confirm
Unlock Pattern Enable
Fig. 6-25 Window for changing names and passwords
3) In the window that is displayed, make all changes (see
chapter 6.1, if required).
Apply
Tip: If you have forgotten the password for the admin-
istrator, you can request a "super" password per e-mail
(see Fig. 7-3, button "Forgot Password"). This, however, is
only possible when an e-mail address has previously been
defined and entered in the recorder (tile "Network, menu
item "Email"). As a precaution, define a new e-mail address
that you do not use for other purposes.
Function
Selection of the data transmission rate
Number of data bits
Number of stop bits
Type of the parity bit:
None, Odd, Even, Mark (always 1), Space (always 0)
Address of the camera (to be able to control all
cameras connected separately)
To use the settings of a camera channel for addi-
tional channels
To reset this menu to its factory settings
To save the settings
User Name Level User Enable Password Enable
admin ADMIN Enable
user1 USER1 Disable
user2 USER2 Disable
user3 USER3 Disable
user4 USER4 Disable
user5 USER5 Disable
user6 USER6 Disable
admin
User Edit
ADMIN
admin
Enable
Disable
Default
User Edit Permission
Enable
Disable
Disable
Disable
Disable
Disable
Disable
Default Apply
in
Show Password
Show Password
Save Cancel