User Change; Live Surveillance; Magnifying An Image Section - Monacor IOR-204 Instruction Manual

4) Click the field "Password" highlighted by a blue frame.
A window with a keyboard will appear. Use the keyboard
to enter the password and then click "Unlock".
5) When a pattern has been defined for unlocking, keep the
left mouse button pressed and draw the pattern.
Unlock
admin
Device ID 000000 (000000)
Draw the unlock pattern first.
Password
Fig. 7-4 Window with an example of an unlock pattern
Note: When the recorder is locked and a menu or function is called up,
the window for unlocking the recorder will immediately be shown. Thus,
it is not absolutely necessary to use the "Unlock" option of the start menu
to unlock the recorder.

7.2 User change

When multiple user accounts have been created for the re-
corder, each new user must log in with their password to be
able to operate the recorder with the user rights they have
been assigned:
1) Show the toolbar (Fig. 7-1): Press the right mouse button
or move the mouse pointer to the centre of the lower edge
of the screen.
2) Click the first symbol to the left
menu (Fig. 7-2).
3) In the first line, click the current user name ("admin", for
example): The window "Switch User" will appear:
Switch User
Device ID 000000
User admin
Password
Fig. 7-5 Window to switch the user
4) In the line "User", click the arrow ∨. A pop-up menu will
appear; select the user in the pop-up menu.
5) Click the field "Password" highlighted by a blue frame. A
window with a keyboard will appear. Click the keyboard
to enter the password. To delete characters, click
confirm the password entered, click
the keyboard will be closed.
6) Finally, click "Switch User". If the password for the user
selected has not been enabled, it will be possible to click
"Switch User" without having to enter the corresponding
password.
Unlock
admin
Device ID 000000 (000000)
Draw the unlock pattern first.
Password
to call up the start
(000000)
Show Password
Switch User Cancel


; the window with

7.3 Live surveillance

When the recorder is switched on, the camera images will be
shown in the live view; the date and the time will always be
inserted at the bottom of the image.
Camera
CH1
CH4
No Camera
Fig. 7-6 Live surveillance
Depending on the model and the settings, a different number
of fields for the camera images is available
Each camera image is designated by the number of the cam-
era channel (CH..). In addition, a camera name (e. g. "Cam-
era", "Entrance", "Checkout Area") and the date / time can
be shown (see chapter 6.6.2).
It is possible to enlarge individual live images. Changes to
the display of the live images will not have any influence on
the current recording (indicated by the symbol
image). The following options are available:
Display Action
HD
SD
With the left mouse button:
Individual image
Double-click the image desired.
in full-screen
On the remote control: Press the corresponding
mode
numeric button(s) 1 ... 9, 0.
With the left mouse button:
Return to the
Double-click the full-screen display.
display of all
On the remote control:
camera images
Press the button ALL (repeatedly).
With the mouse: Press the right mouse button to
show the toolbar. Then select the view:
Depending on the recorder model, different sym-
Different numbers
bols are available.
of camera images
Click the layout symbol repeatedly to switch to
additional camera channels, if required.
On the remote control: Press the button ALL
(repeatedly).
Use the mouse to click the symbol
bar. (SEQ Dwell Time = 5 s; to make changes to this
Sequence of all
setting, see table in chapter 6.6.1, section "Out-
full-screen images
put Configuration"). To terminate the sequence,
. To
click the image with the right mouse button.

7.3.1 Magnifying an image section

1) Using the left mouse button, click the live image in which
you want to magnify an image section. (In the single-image
mode, simply press the left mouse button.) The quick-se-
lection bar will appear:
Fig. 7-7 Quick-selection bar for each camera image
2) Click the magnifier symbol
the magnification factor.
3) As a monitoring feature, a thumbnail view of the complete
live image is shown in the lower right of the screen. The
square in the image will show the section magnified; to
CH2
CH3
No Camera
09/20/2019 20:36:57
•
i 15/09/2019 14:27:38
, , ...
HD
. Use the scroll wheel to set
HD
No Camera
in the camera
in the tool-
45