Information In The Camera Images; Tile Menu To Call Up The Setting Menus; General Settings: Device Name, Language, Menu Display Time, Time, Etc - Monacor IOR-204 Instruction Manual

6.5 Information in the camera images

In each camera image, the channel number (CH..) is shown
in the upper left. In addition, a designation (e. g. "Entrance",
"Checkout Area") and the recording time (see chapter 6.6.2)
can be shown.
The status is indicated in the upper right of the camera image.
•
= recording; the image is being recorded on the hard disk.
= motion; a motion has been detected in the image
S = the intelligent analysis feature has detected a specific
situation in the camera image (chapter 6.6.10)
= an alarm sensor connected to the contacts SENSOR (12)
or ALARM IN (17) has reported an alarm to the recorder
If there is no signal from the camera, "No Camera" will be
shown in the window for the camera image.

6.6 Tile menu to call up the setting menus

For further settings or if the setup wizard has not been used,
all setup menus can be called up via the tile menu.
Channel Record
Channel | Live | Encode | Record |
Image Control | PTZ |
Video Cover | Motion
PIR | Deterrence |
Intelligent |
Network Device
General | DDNS | Disk | Cloud |
Email | IP FILTER |
Fig. 6-13 Tile menu
1) To call up the tile menu, show the toolbar.
HD
SD
For this, either click the right mouse button or move the
mouse pointer to the lower edge of the screen.
2) To call up the start menu, click the first symbol to the
left .
admin
Search
Setup
Unlock
Shutdown
Fig. 6-14 Start menu
3) Click "Setup": The tile menu will be shown.
4) To call up a setting menu, click the corresponding menu
item in the tile menu.
5) Use the right mouse button any time to return to the pre-
vious menu level.
6) According to the factory settings, the menus will be ex-
ited automatically one minute after the last click (this can
be changed via the tile "System", menu item "General",
chapter 6.6.1); alternatively, the menu can also be exited
×
by a click on in the upper right corner.
Alarm
Motion | PIR | I/O |
Intelligent |
PTZ Linkage |
Exception |
Alarm Schedule |
System
General | Multi-User |
Maintenance |
IP Camera Maintain |
Information |
i 09/15/2019 14:27:38
HD
SD
6.6.1 General settings: device name, language,
menu display time, time, etc.
Call up the tile menu and then, in the tile "System", click the
menu item "General".
General Date and Time
Device Name
Device ID
Language
Video Format
Menu Timeouts
Show wizard
Fig. 6-15 General settings
The submenus "General", "Date and Time" and "Output
Configuration" are available. The name of the submenu cur-
rently called up is underlined and shown in turquoise. To go to
a different submenu, click the name of the submenu.
Menu item Function
Here, a different name can be entered so that it is
Device Name
easier to identify multiple recorders by their name.
You can enter your own identification number in
Device ID
the line "Device ID".
Language Menu language
Colour format of the analog cameras connected:
Video Format
PAL (Europe) or NTSC (USA, Asia)
30 s ... 10 Min, OFF; the menus will be exited after
the last click according to the settings made here.
Menu Timeouts
When the setting OFF is selected, the menus can be
exited by means of the right mouse button.
Select this option to show the setup wizard when
Show wizard
the recorder is switched on or restarted.
Click this button to reset this menu to its factory
Default
settings (except language and mode)
i 15/09/2019 14:27:38
Apply
To save the settings
Date
The corresponding settings are described in chap-
...
ter 6.3, step 3) on page 36
Time Zone
Video Output
Here, various settings for the live surveillance view
SEQ Dwell Time
can be made
...
Output Configuration
NWR-801POE
000000
ENGLISH
PAL
1MIN
Default
General
Date and Time
Output Configuration
Apply
39