Important Setting For The Surveillance Set Ioz - Monacor IOR-204 Instruction Manual

Resolution
Output Resolution 1080P(1920x1080)
Apply
Fig. 6-9 Setting for the monitor resolution
9) Select the resolution for the monitor and then click "Apply".
The confirmation box "The output resolution has been
changed, do you want to save?" will appear; click "OK" to
save the setting. If the resolution selected is not compatible
with the monitor, the message "The output resolution was
reverted" will appear. Click "OK" to confirm; the previous
resolution will be set.
10) When the setting for the resolution is correct, click "Next"
to go to the next menu:
Mobile
P2P ID
P2P RSV1811029974864
Local Connection
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Port
Web 80
Client 9000
Fig. 6-10 Information for the PPPOE function
The information shown is required when the recorder con-
nected to a local network is to be accessed via the Internet
(e. g. via a mobile phone). For this, the P2P ID is also avail-
able in the QR code so that it can be scanned.
Note: The information can be called up later at any time: Use the
right mouse button to show the toolbar and then click the symbol
to the right. A window with various information will appear.
11) Click "Next" to go to the next menu page.
38
Wizard
Previous Next Cancel
Wizard
QR code
P2P ID
Previous Next
HD
SD
Summary
System
Resolution
Date/Time
NTP
DST
Network
DHCP
IP Address
Subnet Mask
Gateway
DNS1
DNS2
Don't show this window next time.
Fig. 6-11 Overview of the most important settings
12) The most important settings for operating the recorder have
now been made. Click the field "Don't show this window
next time" in the lower left; the wizard will not be called
up when you start the recorder the next time. To terminate
the wizard, click "Finish".
6.4 Important setting
for the surveillance set IOZ-...
The sets
IOZ-204BV, IOZ-204DV,
IOZ-408BV, IOZ-208DV
are preconfigured in such a way that the cameras provided
will be automatically linked to the recorder as soon as they are
connected to the jacks LAN ... (5 and 6). With this preconfig-
uration and when the cameras have been connected to the
jacks LAN ..., the recorder will try to automatically establish
links to other network-capable units which may result in an
incorrect operational state. Therefore, always make sure to
change the network setting:
1) Call up the tile menu (chapter 6.6) and then, in the tile
"Channel", click the menu item "Channel".
2) In the lower half of the menu, click the symbol
corresponding camera line. The window "Edit Connection
Cancel
Information" will appear.
IP Channels Protocol Manage
No. Edit
i 15/09/2019 14:27:38
Add
Search
Channel Edit
POE CH1
POE CH2
POE CH3
POE CH4
Auto Assign IP to Camera(s)
Fig. 6-12 Changing the setting "Switch Mode" to "Manual Mode"
3) In the line "Switch Mode", change the setting from "Auto
Mode" to "Manual Mode".
4) Click "OK" to save the settings.
5) Repeat this modification for all cameras connected.
6) To exit the menu, click
Wizard
1080P(1920x1080)
09/16/2019 16:59:07, GMT
ON
ON
OFF
192.168.1.100
255.255.255.0
192.168.1.1.
8.8.8.8
8.8.8.8
IP Adress/Domain Port Manufacturer Device Type
Edit Connection Information
Channel CH1
Switch Mode Auto Mode
Alias CH1
Position Left-Top
IP Adress/Domain 10.10.25.151
Subnet Maske 255.255.000.000
Port 9988
Protocol Pelco-D
User Name admin
Password ●●●●●●
Camera Mode Auto
Channel Delete Manual Mode Auto Mode
×
in the upper right of the menu.
Previous Finish
of the
MAC Adress Software Vesion
Show Password
OK Cancel
Defaut Password