Advertisement
10. Loosely install rear edge of rear roof panel
to
11. Loosely install four screws
through front upper
ROPS using four screws
as shown
mount plate into U-clip nuts
as shown.
NOTE
Two additional screws
are provided for installation
of headliner (sold separately) to underside of rear
roof panel.
12. Torque all roof screws
to specification.
TORQUE
12-15 in-lbs. (1.4-1.7 Nm)
Instr 9925231
Rev 03 07/15
Page 4 of 4
Advertisement
