Polaris 2879373 Quick Start Manual

Trailering cover kit

Download this manual

TRAILERING COVER KIT

P/N 2879373

Application

RZR XP 1000

Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please

retain these installation instructions for future reference and parts ordering information.

Kit Contents:

Ref

Qty

APPROXIMATE ASSEMBLY TIME: 5 minutes

IMPORTANT: Your Polaris RZR XP 1000 TRAILERING COVER KIT is exclusively designed for your

vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier

if the vehicle is clean and free of debris. For your safety and to ensure a satisfactory installation,

perform all installation steps correctly in the sequence shown.

INSTALLATION INSTRUCTIONS:

1. If a spare tire is in place, remove the tire and the tie

down clamp before using the cover to trailer.

2. Stow ratchet by connecting the Velcro on the

ratchet webbing to the Velcro on the cover.

Part Description

Trailering Cover

Instructions

Part Number

2635194

9924776

Stow Ratchet to the

Velcro webbing on

the Cover

Figure 1

-1-

Page 1: Kit Contents
9924776 APPROXIMATE ASSEMBLY TIME: 5 minutes IMPORTANT: Your Polaris RZR XP 1000 TRAILERING COVER KIT is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety and to ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
Page 2 3. Drape the cover over the vehicle. Figure 2 4. Attach the front buckle. Figure 2. Front Buckle 5. Thread rear webbing through loop in the back and into the ratchet. Roll ratchet three fourths of the Roll Ratchet way and pull snug. Figure 3. to Tighten Rear Loop Rear Webbing...