Drive information
Odometer and trip meter display
■
P. 137
Stop & Start system total operation time (if equipped)
■
Displays the total amount of time that the engine has been stopped
due to operation of the Stop & Start system since the system was
last reset.
Instantaneous fuel consumption (if equipped)
■
Displays the instantaneous of fuel consumption.
Use the displayed instantaneous fuel consumption as a reference.
Average fuel consumption (if equipped)
■
Displays the average rate of fuel consumption since the function
was reset.
• The function can be reset by pressing the display change button for lon-
ger than 1 second when the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a reference.
Driving range (if equipped)
■
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch to the "LOCK" position (vehicles
without a smart entry & start system) or off (vehicles with a smart entry &
start system). If the vehicle is refueled without turning the engine switch to
the "LOCK" position or off, the display may not be updated.
Average vehicle speed (if equipped)
■
Displays the average vehicle speed since the function was reset.
The function can be reset by pressing the display change button for lon-
ger than 1 second when the average vehicle speed is displayed.
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
2. Instrument cluster
141
2