Ipod Functions; Ipod Problems - Toyota VIOS Owner's Manual

336
5-5. Using an external device
■

iPod functions

When an iPod is connected and the audio source is changed to iPod mode,
●
the iPod will resume play from the same point in which it was last used.
Depending on the iPod that is connected to the system, certain functions
●
may not be available. Disconnecting the device and reconnecting it once
again may resolve some malfunctions.
● While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle's audio system
instead.
■

iPod problems

To resolve most problems encountered when using your iPod, disconnect
your iPod from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner's Man-
ual.
■ Display
P. 326
Error messages
■
If an error message is displayed, refer to the following table and take the
appropriate measures. If the problem is not rectified, take the vehicle to your
Toyota dealer.
"ERROR"
"NO SONGS"
"NO PLAYLIST"
"UPDATE YOUR iPod"
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
Message
This indicates a problem in the iPod or its
connection.
This indicates that there is no music data in
the iPod.
This indicates that some available songs are
not found in a selected playlist.
This indicates that the version of the iPod is
not compatible. Upgrade your iPod software
to the latest version.
Cause/Correction procedures