Switching The Display; Display; Error Messages; Discs That Can Be Used - Toyota VIOS Owner's Manual

326
5-4. Playing audio CDs and MP3/WMA discs

Switching the display

■
Press
If there are continuing texts,
Press and hold
■

Display

Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■

Error messages

If an error message is displayed, refer to the following table and take the
appropriate measures. If the problem is not rectified, take the vehicle to your
Toyota dealer.
Message
"ERROR"
"CD CHECK"
"WAIT"
"NO SUPPORT"
■

Discs that can be used

Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not play correctly.
VIOS_OM_GE_OM52L06E(TMT)_OM99V20b(TDB)_OM52L61E(TMP)_0D053(IMC)
("TEXT") to display or hide the album title.
is displayed.
("TEXT") to display the remaining texts.
Cause/Correction procedures
This indicates a problem either in the CD or
inside the player.
The CD may be dirty, damaged or inserted
upside-down.
Operation has stopped due to a high tempera-
ture inside the player. Wait for a while and then
press the "MODE" button. If the CD still cannot
be played back, contact your Toyota dealer.
This indicates that the MP3/WMA file is not
included in the CD.