Mpa Valve Terminal With Mp Connection (Only Mpa1) - Festo MPA1-MP Series Manual

3. Installation

3.4.2 MPA valve terminal with MP connection (only MPA1)

Sum Maximum number of valve loca
of valve tions which can occupy two ad
locations dresses
4 all valve locations
8 all valve locations
12 all valve locations
16 8 valve locations
20 4 valve locations
24 −−−
1) Two solenoid coils per valve location can be controlled.
2) One solenoid coil per valve location can be controlled.
Table 3/6: Address assignment of the MPA valve terminal with MP connection (only
MPA1) type MPA1−MP−...
Festo P.BE−MPA−EN en 0502b
The addresses must be assigned in ascending order with
out gaps
Counting begins on the valve terminal from left to right
(see diagram).
Depending on the electronic module, a valve location oc
cupies one or two addresses (see table).
The following assignment applies:
Solenoid coil 14 occupies the lower−value address,
solenoid coil 12 occupies the higher−value address.
1)
Valve locations which occupy one
2)
address each
−−−
−−−
−−−
8 valve locations
16 valve locations
all valve locations
3−27