Festo MPA1-MP Series Manual page 44

2. Fitting
Removing
1
Holes for
unlocking the
inscription label
holder
2
Inscription label
holder
Fig. 2/5: Removing the inscription label holder
2−14
Proceed as follows:
1. Remove the 3rd. and 4th. valves from the relevant sub−
base.
2. Unlock the inscription label holder by using a screwdriver
(blade width max. 3.5 mm) to press down the snap hook
(see diagram).
3. Pull the inscription label holder out of the recess in the
sub−base.
1
2
Festo P.BE−MPA−EN en 0502b