Service Connections - Stratasys Fortus 900mc Site Preparation Manual

SERVICE CONNECTIONS

Caution: A licensed electrician must perform all wiring from service connection to
the system - including all connectors, cables, and proper strain relief.
Comply with all applicable local and national electric codes.
1. Remove 10 screws that attach the Left Back Access Plate to the system, This provides access to
the electrical junction box.
Caution: Make sure to replace the back panel after the system is wired.
2. Wiring is to be routed from the top of the system to the fuse blocks.
(Figure 9)
Figure 9: Back Panel Removal
Junction Box
Note: Wiring is to
be Routed from the
Top of the System.
Compressed Air
Top View
12
RJ45 Connector
Left Back
Access Plate
Screws
(10X)