3. Install the universal-jointed shaft shield (A) and secure
it with quick-lock pin (B) and lock nut (C).
A—Universal-jointed shaft
shield
B—Quick-lock pin
Connecting the Drive (Forage Harvester Type
496)
1. Completely remove claw clutch (A) from forage
harvester header drive.
2. To do this, remove plates (B), (C) and (D), and take
off claw clutch (A).
A—Claw clutch
B—Plate
Attaching to a CLAAS Forage Harvester
C—retaining nut
D—Washer
C—Plate
D—Plate
20-8
Continued on next page
KM00321,0000897 -19-28JAN19-9/9
KM00321,0000898 -19-28JAN19-1/6
021519
PN=28