Roland SOLJET Pro 4 XF-640 Setup Manual page 25


Attach the casters onto the stand legs.
Attach the casters to the end farther away from the stand stay. The casters have no particular front and rear
orientation. Tighten the bolts securely (8 locations in total). Loose bolts may cause the stand to wobble.
Tighten
fully
Bolts : 8
Caster
Stand leg

Attach the arms to the stand.
Set the stand upright and fix the arms by tightening the bolts securely in the order given below (12 locations in total for
right and left). Loose bolts may cause the stand to wobble.
Lightly tighten the bolts in the upper 4 locations (8 locations in total for right and left).
Lightly tighten the bolts in the 2 locations on the side (4 locations in total for right and left).
Fully tighten all the bolts to fix the arms completely.
Tighten
temporary
Tighten
fully
Bolts : 12
Bolts
Long
Short
Stand stay
Bolts
Arm(right)
Bolts
Place the side with the
bolts to the front.
3. Assembling and Installing
Hexagonal wrench
Bolts
Caster
Bolts
Hexagonal
wrench
Arm (left)
Bolts
Pipe
23