Roland SOLJET Pro 4 XF-640 Setup Manual page 37

v
APPLY
CLEANING LIQUID
Use one cleaning stick per cleaning session, then discard the stick after use. Reusing cleaning sticks
may reduce printing quality.
w
After cleaning, install the cover R.
Hang the cover
the figure below until you hear a click.
x
APPLY
CLEANING LIQUID
4.
Clean the print heads with the SOL INK cleaning cartridges.

SET SOLCL-LIQUID
1 2
When the message shown on the left appears, put the
cleaning stick in the cleaning liquid and clean the indi-
cated location.
on the hook of the printer, and lower it in the direction of
Press
Insert SOL INK cleaning cartridges into slots 1 and 2.
5. Installing the Ink Cartridges
Area to clean.
.
. Push the area shown in
Click
35