Roland SOLJET Pro 4 XF-640 Setup Manual page 28

3. Assembling and Installing

In the same way as the left media, pass the right media holder onto the shafts and attach
the retaining screw.
Only light tightening is necessary for the retaining screw.

Attach the shaft clamps to secure the shafts in place.
Do not place the media holders too close to the edge so that they will not get caught in the shaft clamps.
Hexagonal wrench
Bolt
Shaft clamp
26
Retaining screw
Tighten loosely.
Hexagonal wrench
Bolt
Shaft clamp