Roland SOLJET Pro 4 XF-640 Setup Manual page 44

6. Network Settings

IP ADDRESS
192 . 000 . 000 . 000

IP ADDRESS
192 . 000 . 000 . 000

{
Repeat
|
IP ADDRESS
192 . 168 . 000 . 003
NETWORK
IP ADDRESS
2.
Set the Subnet Mask.

NETWORK
IP ADDRESS

NETWORK
SUBNET MASK

SUBNET MASK
000 . 000 . 000 . 000

SUBNET MASK
 
Repeat

SUBNET MASK
{
Press
If you use the computer and the machine one-on-one basis, this will complete the settings to make on the
printer. Go on to Step 3.
If you need to set the gateway address, then go on to the procedure following this one.
42
Use
Press

and to set all the address numbers.
'When you finish making the setting, press
Press
The screen shown in the figure appears again.
Press
Press
Use
[SUBNET MASK] : 255.255.255.000
Note: For the subnet mask, make the setting the same value as the
one used by the computer. Here, "255.255.255.000" is entered by
way of example.
Press

and to set the subnet mask.
When you finish making the setting, press
in this order to go back to the original screen.
to select the address number.
.
.
.
twice.
to select the address number.
.
.
.