Delta Compact Drive MS300 IP66/NEMA 4X Series User Manual page 99

LED Status
LINK Green Flashes Network in operation
Troubleshooting
Abnormality
AC motor drive not powered
POWER LED off
The CMM-MOD01 not
connected to AC motor drive
Not connected to network
LINK LED off
Poor contact to RJ45 connector
The CMM-MOD01 not
connected to network
No module found
The PC and the CMM-MOD01
are in different networks and
blocked by network firewall.
The CMM-MOD01 is not
connected to network
Incorrect communication
Fails to open
setting in DCISoft
CMM-MOD01
setup page
The PC and the CMM-MOD01
are in different networks and
blocked by network firewall.
Able to open
CMM-MOD01
setup page but Incorrect network setting in
fails to utilize the CMM-MOD01
webpage
monitoring
Incorrect network setting in the
CMM-MOD01
Fails to send
e-mail
Incorrect mail server setting
Chapter 8 Optional Cards  MS300 (IP66 / NEMA 4X)
Indication
Network connection in normal
On
status
Off Network not connected
Cause
No action is required
No action is required
Check if the network cable is
connected
Corrective Action
Check if AC motor drive is powered, and if the power
supply is normal.
Make sure CMM-MOD01 is connected to AC motor
drive.
Make sure the network cable is correctly connected to
network.
Make sure the RJ45 connector is connected to EtherNet
port.
Make sure the CMM-MOD01 is connected to the
network.
Search by IP or set up the relevant settings using the
AC motor drive keypad.
Make sure the CMM-MOD01 is connected to the
network.
Make sure the communication setting in DCISoft is set
to EtherNet.
Set up with the AC motor drive keypad.
Check if the network setting for the CMM-MOD01 is
correct. For the Intranet setting in your company, please
consult your IT staff. For the Internet setting at home,
please refer to the network setting instruction provided
by your ISP.
Check if the network setting for the CMM-MOD01 is
correct.
Confirm the IP address for the SMTP-Server.
8-9
Corrective Action