Delta Compact Drive MS300 IP66/NEMA 4X Series User Manual page 74

Chapter 7 Optional Accessories  MS300 (IP66 / NEMA 4X)
7-7-2
Installation
Frame A
Screw: M4
Torque value: 6–8 kg-cm / [5.2–6.9 lb-in.] / [0.59–0.78 Nm]
1. Loosen the ground screws on the right and
left.
2. Put the first EMC shield plate into the drive,
and then tighten the ground screws on the
right and left again.
7-24