Delta Compact Drive MS300 IP66/NEMA 4X Series User Manual page 115

General Specifications
Control Method V / F, VFPG*
Applied Motor
Max. Output
Frequency
Starting Torque
Speed Control
Range
Overload
Capability
Control
Frequency
Characteristics
Setting Signal
Main Function
Application
Macro
Motor Protection Over-current, Over-voltage, Over-temperature, Phase loss
Protection
Characteristics
Stall Prevention
Communication
Cards
Accessory
External DC
Power Supply
Certifications
*1 Pulse input (MI7 terminal) is used as speed feedback.
*2 Control accuracy may vary depending on the environment, application conditions or different motors. For details, contact our
company or your local distributor.
, SVC, FOC sensorless
1
IM (Induction Motor), Simple PM control (IPM and SPM)
0.00–599.00 Hz
150 % / 3 Hz
200 % / 0.5 Hz
* 2
100 % / (1/20 of motor rated frequency) SVC control for PM, Heavy duty
1 : 50
1 : 100
* 2
1 : 20
Normal duty: 120 % 60 sec., 150 % 3 sec.
Heavy duty: 150 % 60 sec., 200 % 3 sec.
0–10 V / -10–10 V
4–20 mA / 0–10 V
1 channel pulse input (33 kHz), 1 channel pulse output (33 kHz).
Multiple motor switches (maximum four independent motor parameter settings),
Fast start-up, Deceleration Energy Back (DEB) function, Wobble frequency
function, Fast deceleration function, Master and Auxiliary frequency source
selectable, Momentary power loss ride thru, Speed search, Over-torque
detection, Torque limit, 16-step speed (max.), Accel./decel. time switch, S-curve
accel./decel., three-wire sequence, JOG frequency, Upper/lower limits for
frequency reference, DC injection braking at start and stop, PID control, Built-in
PLC (2K steps), Positioning function
Built-in application parameter groups (selected by industry) and user-defined
application parameter groups.
Stall prevention during acceleration, deceleration and running (independent
settings)
DeviceNet,
EtherCAT
EMM-BPS01 (DC 24 V power supply card)
CE, RCM, REACH, RoHS, TUV, UL
Chapter 9 Specification  MS300 (IP66 / NEMA 4X)
V / F, SVC control for IM, Heavy duty
FOC control for IM, Heavy duty
V / F, SVC control for IM, Heavy duty
FOC control for IM, Heavy duty
SVC control for PM, Heavy duty
, EtherNet/IP, PROFIBUS DP, Modbus TCP, CANopen
9-5