AMBROGIO BASIC User Manual page 74

7-Loosen the screws (E) (4 com-
plete turns).
GB
8-Lower the wheels to lay them
on the base surface or lift
them to keep the robot on the
shim inserted.
9-Tighten screws (E).
By means of the measuring scale
it is possible to detect the new
set cutting height.
10-If the value of the height de-
tected on the measuring scale
is correct, repeat the opera-
tion on the other side.
Important
For a correct functioning of the
robot, the cutting height must be
set equally on both sides.
11-Reassemble the body cover
(D) and tighten the screws (C)
on both sides.
screw (E)
blade
shim
- 32 -
IDM - 41501603400.tif
blade
IDM - 41501604000.tif
screw (C)
guard (D)
IDM - 41501602800.tif
User's manual