AMBROGIO BASIC User Manual page 66

–With the robot that has
stopped automatically in the
stand-by mode, the "start" push
button is used to detect, ac-
cording to the led type on, the
reason of the stop and/or the
causes, for which the robot
does not restart.
–With the robot turned off, the
"start" push button, if pressed
for an extended time, (more
than seconds), is used to turn it
on without the "perimeter wire
GB
identification".
–With the robot in motion, the
"start" push button, if pressed
for an extended time, (more
than seconds), is used to stop
or start the cutting blade.
–"Stop" (B) push button: it is
used to stop the robot and the
rotation of the blade.
LED description
–Led (C) (green): it indicates the charge
status of the batteries of the accumu-
lators.
Led on
– : it indicates that the batteries
are charged.
Led flashing
–
teries are not completely charged.
–Led (D) (red): it indicates that the bat-
teries charge is running down (the led
(C) has turned off).
Led flashing
–
teries are about to run down.
Led on
– : it indicates that the batteries
have completely run down.
–Led (E-G-H): if they are on in the various
combinations, they indicate the opera-
tion conditions of the robot.
Led (E) (green) flashing and led (G)
–
(blue) off
: they indicate that the robot
is activated but not functioning.
To make the robot function, press the
"start" (A) push button.
Led (E) (green) and led (H) (yellow)
–
on
: they indicate that the robot is func-
tioning in the "perimeter wire identifi-
cation" mode.
: it indicates that the bat-
: it indicates that the bat-
led (F)
push button
(A)
push button
(B)
led (G)
Led (E) (green) on and led (H) (yel-
–
low)
off: they indicate that the robot is
functioning in the "without perimeter
wire identification" mode.
Led (E) (green) on and led (H) (yellow)
–
flashing
: they indicate that the robot
does not receive the signal from the pe-
rimeter wire. The robot will automatical-
ly restart the trimming cycle as soon as
the hitch is resolved.
Led (E) (green) flashing and led (G)
–
(blue) on
has completed the trimming of the
lawn. The robot will automatically re-
start the trimming cycle on the follow-
ing day.
Led (E) (green) and led (G) (blue)
–
flashing
has stopped trimming the lawn due to
rain. The robot will automatically re-
start the trimming cycle on the follow-
ing day.
–Led (F) (red) on or flashing in combina-
tion with the turning on of the leds (E-G-
H) indicates that the robot is in break-
down.
To identify the type of breakdown and
the solution to adopt, see "Trouble-
shooting".
- 24 -
led (E)
led (C)
led (D)
led (H)
IDM - 41501603900.tif
: they indicate that the robot
: they indicate that the robot
User's manual
batteries