AMBROGIO BASIC User Manual page 67

REMOTE CONTROL DESCRIPTION
–"Start" (L) push button: it is
used to turn on the robot from a
remote position (movement, U
turn, blade stop and restart and
transfer from one area to anoth-
er).
The "Start" (L) push button, if
pressed shortly with the robot al-
ready on, is used to start it (with
the blade in motion) or to stop it.
Important
The remote control works only if
the robot has been already
turned on by means of the
"start" push button (A).
Warning - Caution
Remember that when the re-
mote control is used with the ro-
bot in the "without perimeter
wire identification" mode, it is neces-
sary to point it so to avoid dangerous
areas hat may cause breaks and/or
serious damages.
The "start" push button, if pressed short-
ly two times in a row, is used to change
the direction of the robot.
The "start" push button, if pressed for an
extended time, is used to stop the robot
and make it restart with the blade disen-
abled. If pressed again for an extended
time, it is used to restart the blade.
With the robot that has stopped auto-
matically and that, after 30 seconds, has
entered in the stand-by mode, the "start"
push button, if pressed for a short time,
is used to restart the robot.
led (F)
push button
(A)
push button
(B)
led (G)
push button (L)
(M)
push button
(P)
push button
–Push buttons (M-N): they are used to
make the robot bend towards right or
left.
The robot keeps on bending towards a di-
rection or the other until the relating
push button (right or left) is kept pressed.
When the push button is released, the
robot proceeds along a straight path.
–Push button (P): available to activate
future functions.
Important
The remote control is provided already
programmed with a univocal code as-
sociated to the referring robot.
If the remote control does not work,
because it does not recognize the code
associated to the referring robot, it is
necessary to carry out its program-
ming (see "Remote control program-
ming procedure").
- 25 -
led (E)
led (C)
led (D)
led (H)
push
button (N)
IDM - 41501603000.tif
User's manual
batteries
GB