Efficacy Data - ResMed S8 Elite System Clinician Manual

338210r3 Eng.book Page 27 Monday, July 11, 2005 1:28 PM
Menu Parameter
Tube Length*
SmartStart*
Leak Alert*
EPR
EPR Setting*
EPR Access
Results

Efficacy Data

Usage Data
Options
Smart Data*
Reminders
Factory Defaults
Description
Sets the length of the air tubing used.
Enables or disables the SmartStart/Stop feature;
when enabled, the device will start automatically
when the patient breathes into the mask, and stop
automatically when the patient takes the mask off.
Enables or disables the Leak Alert feature; when
enabled, leaks > 0.7 L/s for > 20s result in an
audible alert and a high leak message in the LCD.
Note: when Leak Alert is enabled, SmartStart/Stop is
automatically disabled.
Sets expiratory pressure relief to occur all the time,
during ramping only, or never.
Sets the expiratory pressure relief value.
This screen is not displayed if EPR is set to OFF.
Note: EPR SETTING only appears in the patient
menu if you have set patient access to EPR.
Enables or disables patient view of, and ability to
change, expiratory pressure relief settings.
This screen is not displayed if EPR is set to OFF.
Displays pressure, leak, AHI (apnea + hypopnea
index), AI (apnea index), and HI (hypopnea index)
data for a range of time intervals. For details, see
"Clinical Menu Results" on page 31.
Displays usage data for a range of time intervals. For
details, see "Clinical Menu Results" on page 31.
Allows the clinician to select which Smart Data
screens, if any, are displayed in the patient menu.
Note: if you wish to make Smart Data available, set
one or more of the options (Mask Fit, Pressure, or
Usage) to ON. Set Auto Appear to ON so that the
Smart Data screens are displayed in the morning if
the patient resets the device.
In the patient menu, the Smart Data menu is
displayed only if one or more of the options have
been set to ON by the clinician. If AutoAppear is set
to OFF, Smart Data is displayed in the Results menu
only.
Enables you to schedule and/or create reminder
messages for a patient, via a number of submenu
screens. See "Setting Reminders" on page 29.
Resets machine default settings (except for
Language, Date, and Time).
N
AVIGATING THE
27
S8 E M
LITE ENUS