Bay Tek Games TICKET MONSTER Service Manual page 8

SET UP GUIDE, CONT.
Attach the wings with bolts, washers, and nylon
nuts and a 9/16" ratchet socket and wrench. The
wings should pivot at the bolts, opening wide
enough to fit the blue plastic head in between.
Plug in the wing cables to the jumper on the grey
phone cable.
Place the blue monster head onto the top of the
cabinet, inserting the wings into the slots and the
black metal tube through the square hole in the top.
Attach the monitor to the metal tube with included
lock nuts and a 1/2" nut driver.
8