PUPPY VIDEO WIZARD ERROR
If the monitor has been replaced or reset, a Puppy Video Wizard will appear on the screen at power up.
The settings will have to be reset and saved before the game can be played.
Puppy Video Wizard screen will appear.
Open the front door of the cabinet and plug a PS/2 keyboard into the purple port on the motherboard.
Hit < ENTER >.
Make sure a resolution of 1024 x 768 x16 is selected, then hit < ENTER >.
The game software should now boot. Wait 10 secnds, then press < Q > on the keyboard.
Once the black screen with white and red code appears, type REBOOT and hit < ENTER >.
The game will save the video settings and boot up normally.
22