Drive Pulley Nut - PIAGGIO XEVO 125 Euro 3 Service Station Manual

XEVO 125 Euro 3
Engine
- Correctly refit the previously removed Bendix
back to its position.
- Reassemble the parts of the unit (internal lining,
fixed half-pulley, external lining, drive and nut),
spread Loctite 243 Quick Set threadlock on the
thread and tighten the nut to the prescribed torque.
- Avoid the half-pulley rotation with the appropriate
stop key tool..
- Rotate the engine manually until the belt is slight-
ly taut.
CAUTION
IT IS EXTREMELY IMPORTANT THAT THE
BELT IS PERFECTLY FREE WHEN THE FIXED
DRIVING HALF-PULLEY IS ASSEMBLED. THIS
IS TO AVOID CARRYING OUT A WRONG
TIGHTENING OF THE DRIVING HALF-PULLEY.
Specific tooling
020368Y driving pulley lock wrench
Locking torques (N*m)
Drive pulley nut 75 ÷ 83
ENG - 15