License Plate Holder - PIAGGIO XEVO 125 Euro 3 Service Station Manual

XEVO 125 Euro 3
•
Remove the five screws «D», then
slide off the side panel by pulling it
backwards to free the teeth hooking it
to the central cover.
See also
Taillight assy.
License plate light
Handles and top side fairings

License plate holder

•
Remove the rear and side fittings and
the pipe above the helmet compart-
ment retaining frame;
•
Remove the two side licence plate sup-
port clamping screws;
•
Lift the helmet compartment to allow
the licence plate support to free itself
from the two threaded appendages on
the rear frame tube.
See also
Helmet bay
Chassis
CHAS - 11