Helmet Bay - PIAGGIO XEVO 125 Euro 3 Service Station Manual

XEVO 125 Euro 3

Helmet bay

- Remove the side fairings;
- Remove the frame central cover;
- Remove the saddle opening receiver from its
support by undoing the two screws «A» on the left
fairing;
- Undo the four screws fixing the frame upper pipe
and remove it once the boot light connector has
been removed.
- Open the glove box flap;
- Undo the 2 screws two on the bottom of the hel-
met compartment.
- Undo the 2 screws located in the front part of the
helmet compartment.
Chassis
CHAS - 13