Characteristics
AXIAL CLEARANCE BETWEEN CRANKSHAFT AND CONNECTING ROD
Name
Half-shaft, trans-
mission side
Flywheel-side half-
shaft
Connecting rod
Spacer tool
Slot packing system
Characteristic
Compression ratio
12 ± 0.5: 1
Measurement «A» to be taken, is a value of piston protrusion. It indicates by how much the plane formed
by the piston crown protrudes from the plane formed by the upper part of the cylinder. The further the
piston protrudes from the cylinder, the thicker the base gasket to be used (to restore the compression
ratio) and vice versa.
N.B.
NO GASKETS AND SEALS SHOULD BE ASSEMBLED BETWEEN THE CRANKCASE AND CYL-
INDER AND THE DIAL GAUGE EQUIPPED WITH SUPPORT SHOULD BE SET TO ZERO FOR
MEASUREMENT «A» TO BE TAKEN WITH THE PISTON AT TOP DEAD CENTRE POSITION AND
ON A RECTIFIED PLANE.
CHAR - 12
Description
Dimensions
16.6 +0-0.05
16.6 +0-0.05
18 -0.10 -0.15
51.4 +0.05
XEVO 125 Euro 3
Initials
Quantity
A
D = 0.20 - 0.50
B
D = 0.20 - 0.50
C
D = 0.20 - 0.50
E
D = 0.20 - 0.50