PIAGGIO XEVO 125 Euro 3 Service Station Manual page 208

Braking system
- Use the appropriate spyglass on the pump to
check the level of the brake fluid, as shown in the
photograph
- If the level is below the minimum, fill using the two
screws shown in the figure
- Remove the gasket and fill with DOT 4 until the
spyglass is completely covered
CAUTION
MAKE SURE THE BRAKE FLUID DOES NOT
GET INTO YOUR EYES OR ON YOUR SKIN OR
CLOTHES. IF THIS HAPPENS ACCIDENTALLY,
WASH WITH WATER.
CAUTION
THE BRAKING CIRCUIT FLUID IS HIGHLY
CORROSIVE. THEREFORE, WHEN TOPPING
IT UP, AVOID LETTING IT COME INTO CON-
TACT WITH THE PAINTED PARTS OF THE VE-
HICLE. THE BRAKING CIRCUIT FLUID IS HY-
GROSCOPIC, WHICH MEANS THAT IT
ABSORBS MOISTURE FROM THE SUR-
ROUNDING AIR. IF MOISTURE CONTAINED IN
THE BRAKE FLUID EXCEEDS A CERTAIN
VALUE, THIS WILL RESULT IN INEFFICIENT
BRAKING.
Coppie di bloccaggio (N*m)
Viti vaschetta pompa freno 1,5 ÷ 2
Never use brake liquid in open or partially used containers.
Under standard climatic conditions, replace coolant as indicated in the scheduled maintenance table.
For refitting purposes carry out the operations in the reverse order from the removal operation and
respect the tightening torque of the tank cover screws.
Front brake pump
BRAK SYS - 10
XEVO 125 Euro 3