Ip Telephony Manager Console; Tone Send/Receive; Trap Destination - 3Com CommWorks 5210 User Manual

Error: Too many targets specified
Invalid target format
Missing -T option
<target>: Non-Modem Test operation
Program exit during execution
IP Telephony Manager
Console
Error: Too many targets specified

Tone Send/Receive

Error: Invalid amplitude value <value>
Error: invalid poll interval value <value>
Error: invalid test length value <value>
Error: No target specified
Invalid target specification: <specification>

Trap Destination

The user specified more than one IP address/slot-channel combination. (There
is more than one white space-separated word in the target list.)
The target does not specify a valid IP address or host name.
The user did not choose a test to execute using the -T option. (Non-GUI only)
Reported in the test tool final summary when a command or other
non-modem test result is in the target's result table. (Non-GUI, warning only)
The command or test program was terminated (e.g., by a signal) while a
command or test was in progress. (Warning only)
The following are the IP Telephony Manager Console error message and what
it indicates.
The user specified more than one IP address/host name. (There is more than
one white space-separated word in the target list.)
The following are the Tone Send/Receive error messages and what they
indicate.
The amplitude level given on the command line is out of range.
The poll interval value given on the command line is not a positive integer.
The test duration value given on the command line is not a positive integer
The user did not supply an IP address or host name on the command line.
The target does not specify a valid IP address or host name.
The following are the Trap Destination error messages and what they indicate.
Invocation Errors 89