Table of Contents
Advertisement
126 A
: C
L
PPENDIX
OMMAND
INE
I
NTERFACE
Test Modem
Test Analog NIC
Test Analog Phone Line
Restore Analog Phone Line
Busy out DS0 - T1 Slot (N) Span (N) Channel (N)
Restore DS0 - T1 Slot (N) Span (N) Channel (N)
Modem Software Reset
Terminate Connection
Busy Out Analog Phone Line
-h
Displays the command line parameters and the descriptions of the parameters
and their flags.
-c readcomm
The SNMP read community string.
-C writecomm
The SNMP write community string.
target
An optional parameter that specifies the IP address or hostname of the NMC in
which stations are being configured
If no target is specified, the GUI behaves as if -h was the only parameter
passed.
The format for target is as follows:
<IP-host>:S<s-range>[C<c-range>][,S<s-range>
[C<c-range>]...]
Where:
IP-host
Can be in IP-dot notation, or a host name that is defined in the host database
or \etc\hosts file.
Advertisement
Table of Contents
