Chassis Save; Command Tool - 3Com CommWorks 5210 User Manual

The selected configuration file was saved from a chassis of a different size. Continue?
.whb file does not match chassis size
The selected configuration file is from a chassis with a different card configuration. Continue?

Chassis Save

<file> already used by another process
error opening <file>
link to that machine is no longer active
unable to lock <file>
There is no matching configuration to save

Command Tool

An unrecoverable error has occurred.
Unrecoverable error
Error in time slot specification
Select either Yes or No.
Fatal error unless -F (force mismatch) is specified.
Select either Yes or No.
The following are the Chassis Save error messages and what they indicate.
Another program is currently saving to the specified file.
<file> is on a remote machine.
A remote mount of the file is not working.
The lock mechanism that prevents two users from writing the same file is in
deadlock (due to a system error or unusual race condition).
No working, known cards in the chassis contain any configurable parameters
to be saved.
The following are the Command Tool error messages and what they indicate.
An SNMP error or other problem prevented the cycle of commands from being
issued to all target devices. The user may retry the command if desired (GUI);
fatal in non-GUI. Detailed error information may be available in the IP
Telephony Manager log.
An SNMP error or other problem prevented the cycle of commands from being
issued to all target devices. The user may retry the command if desired (GUI);
fatal in non-GUI. Detailed error information may be available in the IP
Telephony Manager log.
The user was prompted for target time slots; after selection, an internal error
occurred. (GUI only)
Execution Errors 93