Autoresponse Submenu; Figure 36 Inventory Print Menu - 3Com CommWorks 5210 User Manual

For example, 0000000010010000 means that DIP switches 8 and 5 are ON
and all others are off.
Software Version—Version of software currently installed in the
component's flash RAM.
You can perform the following tasks from this window:
Save—Saves the inventory data table to an ASCII text file.
Exit—Closes the inventory utility.
Print—Prints displayed data to a printer or file either in postscript or ASCII
format. Figure 36 shows the Inventory Print menu.

Figure 36 Inventory Print Menu

The Inventory Print menu contains the following selections:
Print Target—Selects whether to print to file or print to a printer.
Print Format—Selects whether to print in postscript format or ASCII text
format.
Print Command—Postscript output is piped to this command. The
TCM_PRINT_COMMAND system parameter sets the default.
AutoResponse The AutoResponse submenu lets you define what messages need to appear
Submenu when an event occurs. Refer to Chapter 2 for more information on how to set
the auto response messages (IP Telephony Manager Chassis Console only).
Configuration Menu 61