Figure 7 Authorized Station Completion Window; Figure 6 Authorized Stations Add Window - 3Com CommWorks 5210 User Manual

Figure 6 Authorized Stations Add Window

4 In the Add dialog box, enter the IP address for the workstation you are
currently working from and click OK.
The Authorized Stations Completion window appears with the newly added IP
addresses listed.

Figure 7 Authorized Station Completion Window

For information about setting the network mask, refer to
IP Addresses for Authorized Access
5 Click Add to add additional entries for other workstations you want to grant
management access.
6 Repeat these steps for each device on your network.
7 If you changed the authorized stations on the Gatekeeper, SIP Proxy Server, or
any of the Back-end Servers, you must restart the SNMP agent. Refer to
Restarting Other Entities
later in this chapter.
in Chapter 4 for more information.
Setting Authorized Stations
Defining a Range of
33