Execution Errors; All Applications - 3Com CommWorks 5210 User Manual

90 A : E M
PPENDIX RROR ESSAGES
Error: insufficient arguments
Error: no target supplied
Error: invalid target format
Warning: at most 256 trap commands accepted.
Unexpected argument: <argument>
Warning: trap directives on GUI command line are ignored.

Execution Errors

All Applications

A "-a", "-m", or "-d" directive ended unexpectedly.
The user did not supply an IP address or host name on the command line.
The target is not a valid IP address or host name, or contains slot/channel
specifications.
The user specified more than 256 "-a", "-m", or "-d" directives. The
remaining directives will be ignored.
A directive other than "-a", "-m", or "-d" was seen on the command line.
The user provided "-a", "-m", or "-d" directives to the GUI (xtcmtrap).
This section describes all error messages that can occur as after an application
is successfully launched.
The execution errors categories listed here are:
All Applications
Chassis Restore
Chassis Save
Command Tool
Configuration Tool
Test Tool
IP Telephony Manager Console
Tone send/receive
Trap Destination
Software Download
The following are the Execution error messages for all applications and what
they indicate.