Table of Contents
Advertisement
88
A
: E
M
PPENDIX
RROR
ESSAGES
Extension is not 'sdl
No default NAC file
No default SDL file
<filename> does not match card type <type>
Test Tool
Error: invalid Loop Back Duration value <value> for -s option
Error: cannot use -T and -q at the same time
Error: No target specified
'Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the specified
SDL file does not have the correct extension (*.sdl).
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the Select
Files dialog box and select a NAC file.
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the SDL file
was selected, but the NAC file was not.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the Select
Files dialog box and select a NAC file.
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the NAC file
was selected, but the SDL file was not.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the
Select Files dialog box and select the correct file
Fatal Error (tcmsdl). Nonfatal error (xtcmsdl). This error occurs if the SDL file
and the NAC file apply to different card types.
For tcmsdl, an error message is displayed on the screen or output to the log
file, and then the utility terminates. For xtcmsdl, click OK to bring up the
Select Files dialog box and select the correct file.
The following are the Test Tool error messages and what they indicate.
The loopback duration given on the command line is not a positive integer.
The user specified both a test and a test query. This is not allowed.
The user did not supply at least an IP address or host name on the command
line.
Advertisement
Table of Contents
