Table of Contents
Advertisement
78
C
4: M
HAPTER
AINTENANCE
Changing the SNMP
Community Strings
The IP Telephony Manager default value for SNMP community string is public
for read only and private for read-write. To change the default values you must
first change the community string on the devices and then on IP Telephony
Manager.
For security reasons, you cannot view the community strings through IP
Telephony Manager.
To change the SNMP community strings on the devices, from the IP Telephony
Manager main window:
1 Select Community Name from the Security menu.
Figure 52 Community Name Drop-Down
The Community Name dialog window appears.
Figure 53 Community Name Dialog Window
2 Enter the community string in the Community Name field.
3 Click Set.
Advertisement
Table of Contents
