Table of Contents
Advertisement
Stopping Installation
Resuming an
Interrupted or Failed
Installation
Interoperability
Issues with
Traffix Manager 2.0
If you encounter fatal errors, which prevent installation from continuing,
complete the following:
1 Stop the installation by pressing the Cancel button.
You are prompted you for a confirmation.
2 Click OK to end installation.
When you abruptly quit installation before it successfully completes, you
leave your system in an unstable state, and you must take the appropriate
steps to reinstall the applications. See "Reinstalling Applications" in
Chapter 5 or contact your local 3Com Corporation Technical Support
office for additional information and assistance.
In the event that installation fails or is otherwise interrupted, you will
need to reboot your workstation. After you reboot your workstation, you
can restart installation.
There are several interoperability issues between Transcend NCS and
Traffix Manager 2.0. The following information will be helpful to you if
you are running Traffix.
Agent images cannot be downloaded to probes if you install
I
Transcend NCS while Traffix Manager is still installed. Transcend
overwrites the system settings which tell the TFTP server where the
TFTP download folder is located. This prevents you from downloading
agent images onto probes.
To workaround this, copy the agent images from the Traffix tftp
directory to the Transcend TFTP upgrade directory.
After uninstalling Transcend NCS, Traffix Manager will no longer be
I
able to upgrade RMON probe agents unless an alternate TFTP server is
properly configured.
To workaround this, edit the win.ini file to the following settings:
[3COM.NM]
HOMEDIR=<TraffixInstallPath>
TFTPROOT=<TraffixInstallPath>\traffix\tftp
TFTPTIMEOUT=5
TFTPTRANSMIT=2
Interoperability Issues with Traffix Manager 2.0
27
Advertisement
Table of Contents
