Subscribe to Our Youtube Channel
Related Manuals for Coemar Panorama Led White
Summary of Contents for Coemar Panorama Led White
- Page 1 manuale di istruzioni instructions manual 1^ edizione Maggio 2005 1st edition May 2005...
- Page 3 Please note in the space provided above the relative service information of the model and the retailer from whom you purchased your Panorama Led White : This information will assist us in providing spare parts, repairs or in answering any technical enquiries with the utmost speed and accuracy.
- Page 5 English Index 1. Packaging and transportation Pag. 6 1.1. Packaging “ 1.2. Transportation “ 2. General information Pag. 6 2.1. Important safety information “ 2.2. Warranty conditions “ 2.3. CE Certification “ 3. Installation and connection Pag. 7 3.1. Projector components “...
- Page 6 2. For mains connection, adhere strictly to the guidelines outlined in this manual. 3. The level of technology inherent in the Panorama Led White requires the use of specialised personnel for all service applications; refer all work to your authorised Coemar service centre.
-
Page 7: Installation And Connection
English 3. Installation and connection 3.1. Projector components The principal components and dimensions of the Panorama Led White are shown in the diagram below. Component description 1. Rear housing 2. Led housing 3. Reflector 4. Lens support (optional) 5. Colour filter holder (optional) 6. -
Page 8: Safety Chain
3.4. Safety chain When hanging the Panorama Led White we recommend the use of a safety chain affixed to the appropriate hole in the fixture and to the sus- pension device. The safety chain should be either a metal wire rope or a metal chain, both suitably rated for the purpose. -
Page 9: Adjusting Beam Direction
3.5. Adjusting beam direction The Panorama Led White can be tilted to adjust the beam output. To perform this adjustment, follow the instructions set out below. 1. using a suitable tool, loosen the two screws “A” located on the sides of the projector, thus allowing the inclination to be changed. - Page 10 6. Fit the appropriate filterholder “E”. 7. Refasten the 4 screws “A”. 8. Reclose the cover. The following table details the range of beam angle and diffusion filters available for the Panorama Led White. Optical group Beam angle 1. Narrow Lenses (cod. 9844) 20°...
-
Page 11: Operating Voltage And Frequency
The fixture may operate at voltages ranging from 90 to 250V AC at a frequency of 50 or 60 Hz. It is not necessary to effect any setup procedures, Panorama Led White will automatically adjust its operation to suit any frequency or voltage within this range. -
Page 12: Connecting Dmx Signal
Control signal is digital and is transmitted via two pair screened cable, as recommended in international standards for the transmission of DMX512. Connection is serial, utilising the XLR3 sockets located on the base of the Panorama Led White. Coemar supplies the unit with XLR3 connectors with an IP67 protection rating;... -
Page 13: Dmx Addressing
IMPORTANT NOTE: the following points are valid for all the instructions which follow. 1. Setting a dip-switch to the ON position activates its function 2. The DMX address may be altered without the need to turn the Panorama Led White off. The following are examples only for setting DMX addresses. -
Page 14: Test Function
English 6. Test function With the dip-switch set to the ON position, Panorama Led White will test each individual channel without the need for a DMX con- troller to be connected. For example: set the dip-switch to ON on the Panorama Led White. - Page 15 8.1. Setting up functionality via DR1 (FUNC) Using the inbuilt functionality of the Panorama Led White via the DR1, it is possible to alter the function settings of the fixture. The following diagram illustrates the menu navigation system of the DR1 in FUNC.
- Page 16 The initial configuration settings are fautly or have been loaded incorrectly. The projector has loaded its default configuration. Turn the projector off and on again and if the error persists teh EEPROM is either defective or absent; refer to your Coemar service centre for a replacement component. DMX ADDRESS Error ADER The projector is not receiving all the DMX channels necessary for its operation.
-
Page 17: Maintenance
10. Thermal protection A thermal sensor in the body of the Panorama Led White protects the fixture against overheating. The sensor operates by remov- ing power to the leds should the operating temperature exceed the factory preset. 11. Maintenance Whilst every possible precaution has been taken to ensure the trouble-free operation of your Panorama Led White, the following peri- odic maintenance is highly recommended. -
Page 18: Frequently Asked Questions
English 13. Frequently asked questions The diagram below indicates some possible problems and solutions if they should occur. Problem Possible solution Panorama Led RGB won’t turn on. Mains power is not available to the Panorama Led RGB: - Check that the green Led is on, if so check the incoming voltage to the Panorama Led RGB. - Page 19 English NOTES...
- Page 20 Inghilterra 46042 Castelgoffredo (Mantova) Italy Tel. 0376/77521 Fax 0376/780657 Coemar si riserva il diritto di apportare modifiche senza preavviso. Coemar reserves the right to effect modifications without notification manuale istruzioni instruction manual Panorama Led White 1^ edizione Maggio 2005...
Need help?
Do you have a question about the Panorama Led White and is the answer not in the manual?
Questions and answers