Running Avid System Test Pro; Running Avid Storex; Using Mediadock Lvd Manager Software - IBM IntelliStation M Pro 6868-5BU System Integration Manual

7-16

Running Avid System Test Pro

Running Avid StorEx

Using MediaDock LVD Manager Software

Installing and Verifying Avid System Software
The Avid setup guide that ships with the system contains a section
that explains how to run Avid System Test Pro (AST) to test the Avid
board set. You should restart the system prior to running AST. Help is
also available for AST.
The Avid setup guide that ships with the system contains a section
that explains how to run Avid StorEx. If your disk drives need to be
formatted and partitioned, see the setup guide that ships with your
Avid system.
If you are connecting an Avid MediaDock LVD to your IBM 6868
system, you must be aware that the MediaDock LVD Manager
software requires a section of the EZ-SCSI software to run properly.
The EZ-SCSI software can be found on the device driver and the IBM
Enhanced Diagnostics CD-ROM that ships with the system. The
EZ-SCSI software provides the aspi32 driver that is required by the
MediaDock LVD Manager software.
To install the EZ-SCSI software on the IBM 6868 system:
1. Place the IBM Enhanced Diagnostics CD-ROM into the CD-ROM
drive.
2. Double-click the My Computer icon.
3. Double-click the CD-ROM icon.