IBM IntelliStation M Pro 6868-5BU System Integration Manual page 84

6-8
n
Changing System BIOS and Creating Windows NT Image
2. Turn on the system using the Power button and press F1 when
asked for at the IBM logo.
You are placed into the system BIOS at the Configuration/Setup
menu (Main menu) after the execution of the SCSI BIOS.
3. Press the Down Arrow key to reach the Start Options menu
selection and press Enter.
The Start Options menu appears.
4. You are automatically placed at the Startup Sequence selection.
Press Enter.
5. Press the arrow keys to select the following startup devices under
the Primary Startup Sequence section:
- First startup — Diskette (floppy) drive 0
- Second startup — Hard disk 0
- Third startup — Network
6. Press the Esc key twice to return to the Main menu.
7. Press the Down Arrow key to reach Exit Setup and press Enter.
8. Save and exit the system BIOS settings as explained on the screen.
You continue with the boot sequence.
9. During the boot procedure of the Windows NT operating system
select the following:
- The Windows NT 4.0 operating system
- The Avid hardware profile
10. Log in to the system.
11. When asked for a password press Enter.
Your system might perform a checkdisk during the boot procedure. If it does,
let it finish, it will not harm the system.
The next chapter explains how to install the Avid application and the
appropriate software drivers.