IBM IntelliStation M Pro 6868-5BU System Integration Manual page 98

7-14
Installing and Verifying Avid System Software
To install the driver for the Turtle Beach sound board:
1. Insert the CD-ROM packaged with the sound board into the
CD-ROM drive.
2. Open the Control Panel and double-click the Multimedia icon.
The Multimedia Properties dialog box appears.
3. Click the Devices tab.
4. Click the Add button.
5. Select the Unlisted or Updated Driver option and press OK.
A dialog box appears requesting the source path of the drivers to
be installed. Either type a specific path or use the Browse button to
locate the appropriate location of the drivers. Choose the
CD-ROM drive from the submenu and navigate to the NT
directory. Select the NT folder and click OK.
6. In the Install Driver dialog box click OK. The Add Unlisted or
Updated Driver dialog box appears. Select Turtle Beach
Montego II, and then click OK. The driver is installed. You will
receive a message asking if you want to restart your system. Click
Restart Now.
Use the following procedure to verify the driver status and enable
MIDI:
1. Open the Control Panel and double-click the Multimedia icon.
The Multimedia Properties dialog box appears.
2. Click the Devices tab.
3. Click the "+ " box to the left of Audio Devices to expand the
display. Audio for Turtle Beach Montego II should appear. If it
does not appear, the driver is either not present or not started. If
the driver is present, ensure that the playback and record sections
are enabled.