Running The Operating System Setup Program; Turning Off The Computer - IBM IntelliStation M Pro 6219 Installation Manual

Running the operating system setup program

If you are starting your computer for the first time, the Microsoft Windows setup
program runs automatically when you start the computer. The program will prompt
you to make choices or type information. If you need more detailed information
other than what is provided in this Installation Guide, see your Microsoft
operating-system manual.
Important:
1. After turning on your computer for the first time, you must complete the
2. The setup program might be slightly different from the one described in your
3. During the setup procedure, you must indicate that you accept the license
4. The Microsoft registration information will already be displayed in the registration
You will need the following information to complete the setup program:
v The Microsoft documentation that comes with your computer.
v Network information from your network administrator, if your computer is being
v The printer model and port, if a printer is attached directly to your computer.
After the setup procedure finishes and the computer restarts, the Windows desktop
opens. Your computer is ready for use.

Turning off the computer

When you turn off the computer and leave it connected to ac power, the computer
can respond to requests, such as a remote request to turn on the computer. To
remove all power from the computer, you must disconnect it from the power source.
Some operating systems require an orderly shutdown before you turn off the
computer. See your operating-system documentation for information about shutting
down the operating system.
32
IBM IntelliStation M Pro Type 6219: Installation Guide
operating system setup procedure before turning off your computer; otherwise,
unexpected results might occur.
operating-system manual. Some choices do not appear because they are
preset.
agreement.
field. If the Product ID number is not already displayed, you must type it. The
Product ID is on a label attached to the computer.
connected to a network.