Table of Contents
Advertisement
4-12
Installing the Avid Boards
Inspecting the Meridien II Digital Media Board Set
Connector under
this location
(Standoffs on other
side of board set)
Installing Memory, the Avid Board Set, and the Fan Kit
Figure 4-4
Emulex LP850 Fibre Channel Board
Using Table 4-1 on page 4-5, install the boards in the proper slots using
the descriptions provided in the following sections.
Before installing the Meridien II board set in the system, you must
ensure that the daughter board and the Meridien II board are securely
fastened together (see Figure 4-5) using a connector, two cables, and
five plastic standoffs (on the other side of the board set).
Figure 4-5
Avid Meridien II Digital Media Board Connections
Cable A
Cable B
Advertisement
Table of Contents
Troubleshooting
