Verifying Software Installation - IBM IntelliStation M Pro 6868-5BU System Integration Manual

n

Verifying Software Installation

For single-monitor systems, open the Avid Display Control Panel, click the
Desktop tab, click the Normal Mode button, and then complete the procedure.
22. Choose True Color on the Color Palette menu and set the refresh
rate to 75 Hz.
23. Set the Desktop Area slider to 2048 x 768 for two-monitor systems
and 1024 x 768 for single-monitor systems.
24. Click the Test button and the system displays the resolution
selected.
25. Click Apply to apply the change, and then click OK.
Since you restarted the system, you should verify that all the newly
installed drivers installed properly.
The following procedure includes both the ATTO UL3D controller and
the Emulex F/C controller.
You will verify the following drivers:
• Avid board set device drivers such as:
- Meridien digital media board driver
- EditDMA driver
- 3D DVE effects driver (if applicable)
®
- Sentinel driver, used by the application key (dongle)
• Disk controller drivers
Verifying Software Installation
7-9