Download
Share
Print this page
Insignia NS-3IN1MT50C User Manual
  1. Manuals
  2. Brands
  3. Insignia Manuals
  4. Indoor Furnishing
  5. NS-3IN1MT50C
  6. User manual

Insignia NS-3IN1MT50C User Manual

Wood finish and glass 3-in-1 tv stand
Hide thumbs

Advertisement

Quick Links

Download this manual
Wood Finish and Glass
3-in-1 TV Stand
for TVs up to 52"/135 lbs.
NS-3IN1MT50C/NS-3IN1MT50C-C
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS: PARTS ..................................4
PACKAGE CONTENTS: HARDWARE .......................5
ASSEMBLY INSTRUCTIONS ......................................7
CARE AND MAINTENANCE ................................... 29
USER GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the NS-3IN1MT50C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Insignia NS-3IN1MT50C

Summary of Contents for Insignia NS-3IN1MT50C

  • Page 1: Table Of Contents

    USER GUIDE Wood Finish and Glass 3-in-1 TV Stand for TVs up to 52”/135 lbs. NS-3IN1MT50C/NS-3IN1MT50C-C SAFETY INFORMATION AND SPECIFICATIONS .2 PACKAGE CONTENTS: PARTS ........4 PACKAGE CONTENTS: HARDWARE .......5 ASSEMBLY INSTRUCTIONS ........7 CARE AND MAINTENANCE ........29 Before using your new product, please read these instructions to prevent any damage.

  • Page 2: Safety Information And Specifications

    3-in-1 TV STAND SAFETY INFORMATION AND SPECIFICATIONS Maximum overall weight: 235 lbs (106.6 kg) CAUTION: The top surface of this stand Maximum top shelf weight: 135 lbs (61.2 kg) is designed for use with a product weighing no more than Maximum lower shelf weight: 50 lbs (22.6 kg) 135 lbs.
  • Page 3 3-in-1 TV STAND Tools needed: Phillips screwdriver Pencil Power drill Edge-to-edge stud finder 3/8” drill bit (for tipping restraint) Level 3/16” wood drill bit Hammer 1/2” Socket wrench 7/16” masonry drill bit www.insigniaproducts.com...

  • Page 4: Package Contents: Parts

    3-in-1 TV STAND PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. C Short back frame (1) B Right side frame (1) A Left side frame (1) E Top crossbar (1) D Long rear support (1) F Top stringer (1) G Middle crossbar (1)

  • Page 5: Package Contents: Hardware

    3-in-1 TV STAND PACKAGE CONTENTS: HARDWARE Note: You may receive extra hardware.Note: You may receive extra hardware. Make sure that you have all the hardware necessary to assemble your new TV stand. Label Hardware Qty. Label Hardware Qty. Lock washer Cable clip Flat washer Suction cup...
  • Page 6 Bolt M6 × 35 mm Flat washer M4/M5 Bolt M8 × 16 mm Flat washer M6/M8 Bolt M8 × 40 mm Sellpoints Video Instruction Guide Go to http://vig.sellpoints.com/insignia/default/ISGBBY00001.html to view step-by-step instructional videos for assembling and installing your product. 100mm www.insigniaproducts.com...

  • Page 7: Assembly Instructions

    3-in-1 TV STAND ASSEMBLY INSTRUCTIONS Step 1: Align and attach the left and right side frames (A and B) to the back frame (C) Caution: Assemble your stand on a carpeted floor or the empty carton to avoid scratching your stand. 1 Insert two 1 3/8"...
  • Page 8 3-in-1 TV STAND Step 2 : Align and attach the upper and middle crossbars (E and G) and the bottom brace (I) to the side frames (A and B) 1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top rail of the side frames (A and B) and securely screw into the threaded holes of the top crossbar (E).
  • Page 9 3-in-1 TV STAND Step 3 : Align and attach the front stringers (F, H, and J) to the front of the side frames (A and B) 1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top rail of the side frames (A and B) and securely screw into the threaded holes of the top stringer (F).
  • Page 10 3-in-1 TV STAND Step 4 : Leveling the stand Stand the assembled frame upright. Adjust the levelers on the side frames (A and B) to level the assembly. NOTE: For swivel stand assembly, see “SWIVEL STAND ASSEMBLY INSTRUCTIONS” on page 22. For Wall Mount or Table Top assembly, continue to the next step.
  • Page 11 3-in-1 TV STAND Step 5 : Attach the cable clips • Attach two of the cable clips (R) to the back of the side frames (A and B) with two 3/4" bolts (T) per cable clip. You’ll need: R (2) T (4) EE (1) www.insigniaproducts.com...
  • Page 12 3-in-1 TV STAND Step 6 : Attach the shelves 1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each). TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench while twisting it clockwise into the hole, as if you were screwing it in.
  • Page 13 3-in-1 TV STAND FINAL TABLE TOP ASSEMBLY INSTRUCTIONS Step 7 : Position the TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand.
  • Page 14 3-in-1 TV STAND WALL MOUNT ASSEMBLYINSTRUCTIONS Step 1: Select the correct bolts, washers, and spacers for your TV. M4 hardware assembly: • M4 x 12 mm bolts (HH) top screw holes • M4 x 30 mm bolts (II) bottom screw holes •...
  • Page 15 3-in-1 TV STAND Step 2: Determine whether your TV has a flat back or an irregular or obstructed back 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions.
  • Page 16 3-in-1 TV STAND Step 3 : Option 1 - Mounting bracket instructions for a TV with a flat back To mount the TV brackets: 1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make sure the hooks face the bottom of the TV.
  • Page 17 3-in-1 TV STAND Step 3 : Option 2 - Mounting bracket instructions for a TV with an irregularly shaped or obstructed back 1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make sure the hooks face the bottom of the TV.
  • Page 18 3-in-1 TV STAND Step 4 : Option 1 - Mount the frame to a stud wall NOTE: See Step 4: Option 2 for instructions on mounting the frame to a concrete wall. 1 Use a stud sensor to locate two adjacent wall studs, then position the mounting frame (P) exactly between the two studs.
  • Page 19 3-in-1 TV STAND Step 4 : Option 2 - Mount the frame to a block or concrete wall 1 Place the mounting frame (P) against the wall where you intend to mount the TV. Use a level to make sure the mounting frame (P) is level, then mark the four mounting holes on the wall.
  • Page 20 3-in-1 TV STAND Step 5 : Attaching the TV to the mounting frame on the wall 1 Lift the TV up to the mounting frame (P). 2 Set the hooks on TV brackets (Q) over the mounting frame, then lower the hooks onto the bars on mounting frame.
  • Page 21 3-in-1 TV STAND Step 6 : Position the TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand.
  • Page 22 3-in-1 TV STAND SWIVEL STAND ASSEMBLY INSTRUCTIONS Step 1: Align and attach the long rear support 1 Insert four 2¼" bolts (W) through the lock washers (X) and the flat washers (Y) through the drilled holes on the long rear support (D). 2 Securely screw into the threaded holes of the side frames (A and B).
  • Page 23 3-in-1 TV STAND Step 2: Attach the swivel bracket 1 Align the swivel bracket (N) at the height you would like the center of your TV to be. 2 Insert a 2¼” bolt (W) through a lock washer (X) and a flat washer (Y) and then through the swiveling bracket (N) and the drilled hole on the long rear support (D).
  • Page 24 3-in-1 TV STAND Step 3: Attach the mounting frame to the swivel bracket 1 Hold the flat side of the mounting frame (P) against the swivel bracket (N), aligning the holes. Make sure that the two recessed holes on mounting frame (P) are at the bottom. 2 Insert a 3/4"...
  • Page 25 3-in-1 TV STAND Step 4: Attach the cable clips • Attach the cable clips (R) to the back of the long rear support (D) in two of four locations with two 3/4" bolts (T) per cable clip. You’ll need: EE (1) T (4) R (2) www.insigniaproducts.com...
  • Page 26 3-in-1 TV STAND Step 5 : Attaching the TV to the mounting frame on the swivel bracket 1 Attach the TV brackets (Q) to the back of the television following the steps on pages 15, 16, and 17, depending on the type of TV that you own. 2 Lift the TV up to the mounting frame (P).
  • Page 27 3-in-1 TV STAND Step 6 : Attach the shelves 1 Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each). TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench while twisting it clockwise into the hole, as if you were screwing it in.
  • Page 28 3-in-1 TV STAND Step 7 : Position the TV stand and install the tipping restraint hardware kit 1 Position the assembled stand against a wall where you plan to use it. 2 Follow the instructions printed on the bag containing the tipping restraint hardware kit (GG) to attach the restraint hardware to the wall and the stand.

  • Page 29: Care And Maintenance

    3-in-1 TV STAND CARE AND MAINTENANCE Wood/Laminate • Use your favorite type of furniture polish. • Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand. • Always test any polish in a discrete location first, such as the back of the stand, to make sure that there is no adverse reaction.
  • Page 30 FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN Insignia and are not returned to you. If service of Products or DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND parts are required after the Warranty Period expires, you must NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY pay all labor and parts charges.
  • Page 31 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2014 Best Buy. All rights reserved.

This manual is also suitable for:

Ns-3in1mt50c-c