Page 1
User Guide 64" Wood Finish TV Stand NS-HW1764G Before using your new product, please read these instructions to prevent any damage.
Page 2
NS-HW1764G Table of Contents Package contents Safety information Specifications Assembling your TV stand Attaching the doors Installing the shelves Leveling your TV stand Care and maintenance One-Year Limited Warranty Package contents Parts (A) Base (B & C) Divider panels (2) (D & E) Sides (2) (G) Top...
Page 3
64" Wood Finish TV Stand Hardware Label Hardware Quantity Hinges 4 (dia.) × 22 mm screws 8 (dia.) × 30 mm wooden dowels Shelf supports Touch-up pen 3.5 (dia.) × 16 mm screws Handles 6.3 (dia.) × 15 mm bolts Tools Needed Phillips screwdriver www.insigniaproducts.com...
15 lbs. (6.8 kg). Using with other products including products that weigh more than the maximum weight allowed, may result in instability, which may cause possible injury. Model #: NS-HW1764G Distributed by Best Buy Purchasing, LLC Manufacturer: Elements International Group, LLC Manufacture date: This TV Stand is intended for a TV NO WIDER than 75".
64" Wood Finish TV Stand Unload shelves from the top to the bottom before moving the stand. Do not push the stand, especially on a carpeted floor. Have a friend The stand can tip over or help you lift the item and set it in Improperly moving the break if improperly moved.
NS-HW1764G Assembling your TV stand 1 Insert eight wooden dowels into the base. You’ll need: N (8) 2 Align the divider panels with the wooden dowels (the holes in the panels should face each other), then push the locks closed.
Page 7
64" Wood Finish TV Stand 3 Align the sides with the wooden dowels (the holes in the sides should face each other), then push the locks closed. You’ll need: D & E www.insigniaproducts.com...
Page 8
NS-HW1764G 4 Slide the back into the groves formed by the base and sides. The finished side should face the inside. You’ll need: www.insigniaproducts.com...
Page 9
64" Wood Finish TV Stand 5 Insert eight wooden dowels into the divider panels and sides, then make sure that the unused locks are open. You’ll need: N (8) 6 Align the top with the wooden dowels (the groove should be towards the back of the stand), then push the locks closed.
Page 10
NS-HW1764G 7 Screw the eight bolts into the back of the TV stand to secure it to the sides and divider panels. You’ll need: X (8) 8 See Attaching the doors (on the facing page) to continue assembly. www.insigniaproducts.com...
64" Wood Finish TV Stand ATTACHING THE DOORS 1 Fit the hinges into the circular holes on the doors, align the screw holes, then use a Phillips screwdriver and two 3.5 × 16 mm screws to secure each hinge. You’ll need: R (8) L (4) Phillips...
Page 12
NS-HW1764G 2 Align the handles with the holes on the front of the doors, then use a Phillips screwdriver to attach the handles with the 4 × 22 mm screws. You’ll need: V (2) K (4) Phillips screwdriver 3 With the hinges in the open position, align the hinge's pre-assembled screws with the holes in the sides of the TV stand (use the middle holes), then use a Phillips screwdriver to secure.
64" Wood Finish TV Stand 4 If a door is not aligned correctly, loosen or tighten the screws on the hinges to adjust their alignment. You’ll need: Phillips screwdriver INSTALLING THE SHELVES Insert the shelf supports at the height that you want your shelves, then slide the shelves into place.
NS-HW1764G LEVELING YOUR TV STAND If your TV stand is not level, turn your stand onto its back and tighten or loosen the leveling feet on the bottom. Care and maintenance Use your favorite type of furniture polish. Do not spray directly onto the stand. Spray onto a soft cloth then wipe the stand.
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts.
Page 16
(burn-in). Damage due to incorrect operation or maintenance Connection to an incorrect voltage or power supply Attempted repair by any person not authorized by Insignia to service the Product Products sold “as is” or “with all faults” Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)
Need help?
Do you have a question about the NS-HW1764G and is the answer not in the manual?
Questions and answers