3-in-1 TV STAND
Step 4
: Option 2 - Mount the frame to a block or concrete wall
1 Place the mounting frame (P) against the wall where you intend to mount the TV. Use a level to make sure the
mounting frame (P) is level, then mark the four mounting holes on the wall. Never locate the mounting holes
into the mortar between blocks. Remove the mounting frame.
2 Drill four 7/16" (11 mm) holes through the screw marks to a depth of 2.5" (64 mm).
3 Insert a concrete anchor (CC) into each of the screw holes using a hammer.
4 Align the mounting frame over the concrete anchors.
5 Place a washer (BB) over one of the mounting frame screw holes, then insert a lag bolt (AA) and tighten.
6 Repeat the previous step for the other three screw holes.
CAUTION: Make sure that the lag bolts are tight and secure, but do not overtighten them.
You'll need:
BB (4)
AA (4)
CC (4)
2.50"
(64 mm)
BB
AA
Hammer
1/2" Socket wrench
Level
www.insigniaproducts.com
CC
7/16" masonry
drill bit
Pencil
Drill
19